Requirement:
Auth Survivability is supported on Local controllers also.
Master and local controller.
To enable this feature under Security -> Authentication - > Advanced.
7008) (config) #show switches
All Switches ------------ IP Address Name Location Type Model Version Status Configuration State Config Sync Time (sec) Config ID ---------- ---- -------- ---- ----- ------- ------ ------------------- ---------------------- --------- 10.15.56.39 7008 Building1.floor1 local Aruba7008 6.5.1.0_56052 up UPDATE SUCCESSFUL 0 72
Total Switches:1
(7008) (config) #show aaa auth-survivability
Auth-Survivability: Disabled (Not Running) Survival-Server Server-Cert: N/A Survival-Server Cache lifetime: 24 hours
(7008) (config) #aaa auth-survivability enable (7008) (config) #write memory Saving Configuration...
Configuration Saved.
Auth-Survivability: Enabled (Running) Survival-Server Server-Cert: N/A Survival-Server Cache lifetime: 24 hours
It only caches the Client mac, Auth method, credentials and Auth server (7005_C10) #show aaa auth-survivability-cache Auth-Survivability Cached Data ------------------------------ Station User Name Authenticated Using Authenticated By Authenticated On ------- --------- ------------------- ---------------- ---------------- Total Entries: 0
© Copyright 2024 Hewlett Packard Enterprise Development LPAll Rights Reserved.