Do we support Authentication Survivability for Local controllers or only for branch controller?

MVP Expert
MVP Expert
Requirement:

Auth Survivability is supported on Local controllers also.

Master and local controller.



Solution:

To enable this feature under Security -> Authentication - > Advanced.



Configuration:

7008) (config) #show switches

All Switches
------------
IP Address Name Location Type Model Version Status Configuration State Config Sync Time (sec) Config ID
---------- ---- -------- ---- ----- ------- ------ ------------------- ---------------------- ---------
10.15.56.39 7008 Building1.floor1 local Aruba7008 6.5.1.0_56052 up UPDATE SUCCESSFUL 0 72

Total Switches:1

(7008) (config) #show aaa auth-survivability

Auth-Survivability: Disabled (Not Running)
Survival-Server Server-Cert: N/A
Survival-Server Cache lifetime: 24 hours

(7008) (config) #aaa auth-survivability enable
(7008) (config) #write memory
Saving Configuration...

Configuration Saved.

(7008) (config) #show aaa auth-survivability

Auth-Survivability: Enabled (Running)
Survival-Server Server-Cert: N/A
Survival-Server Cache lifetime: 24 hours

 



Verification

It only caches the Client mac, Auth method, credentials and Auth server
(7005_C10) #show aaa auth-survivability-cache

Auth-Survivability Cached Data
------------------------------
Station User Name Authenticated Using Authenticated By Authenticated On
------- --------- ------------------- ---------------- ----------------

Total Entries: 0

Version history
Revision #:
2 of 2
Last update:
‎03-15-2019 01:38 PM
Updated by:
 
Labels (1)
Contributors
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: