How do I check the model and version of the supervisor card?

Aruba Employee
Aruba Employee

Product and Software: This article applies to Aruba 5000 and 6000 Series Controllers and ArubaOS 3.3.2.


The Aruba 6000 multiservice controller chassis can be used for different type of supervisor modules, including supervisor cards version 1 and 2 (SC-I and SC-II) and the multiservice module (M3).

To check the supervisor module version, enter this command from the CLI:


(Aruba)# show inventory

Supervisor Card slot : 0
Supervisor FPGA : SCCI Rev 0x6
SC Assembly# : 201000xx (Rev:05.00)
SC Serial# : F004594xx (Date:07/28/07)
Crypto Card Assembly# : 201000xx (Rev:01.00) (SC-I)
Crypto Card Serial# : F00457176
Mgmt Port HW MAC Addr : 00:0B:86:FF:13:5B
HW MAC Addr : 00:0B:86:05:67:80 to 00:0B:86:05:67:FF PEER Supervisor Card : Absent
Line Card 1 : Absent
Line Card 2 : Present
Line Card 2 FPGA : LCCI Rev 0x6
Line Card 2 Switch Chip : SwitchCore CXE-1000 Rev 0xA
Line Card 2 Mez Card : Present
Line Card 2 SPOE : Absent
Line Card 2 Sup Card 0 : Present (Active)
Line Card 2 Sup Card 1 : Absent
Line Card 2 Assembly# : 2010018C (Rev:01.00) (24FE+2GE)
Line Card 2 Serial# : F003127xx (Date:01/25/07)
Line Card 2 MEZZ Assembly# : 2010002A (Rev:01.00)
Line Card 2 MEZZ Serial# : F003171xx
Line Card 3 : Absent


Note: The line in bold blue indicates that the supervisor module installed on the controller is an SC-I with Version 01.00.

Version history
Revision #:
1 of 1
Last update:
‎07-01-2014 03:52 PM
Updated by:
Labels (1)
Tags (2)
Search Airheads
Showing results for 
Search instead for 
Did you mean: