LMS IP configuration in 8.0

MVP Expert
MVP Expert
Q:

How to configure "LMS IP" address in Aruba OS 8.0? 



A:

LMS-IP configuration was always been part of AP system profile within an AP Group. Starting Aruba OS 8.0, LMS IP for AP redundancy can now be directly configured from AP group itself. Whatever address configured for LMS/Backup-LMS from AP group under LMS, will reflect in the AP system profile too.

 

LMS Configuration Prior to  8.X

Navigate to the Configuration > Wireless > AP Configuration > AP Group > Select the AP Group > AP System profile > LMS-IP Configuration

 

 

 

LMS Configuration in 8.0

Select a Controller or a Group, navigate to Configuration > AP Groups > LMS Configuration

 

 

As you can see in the above screenshot, the IP address configured in the LMS and Backup LMS directly under the AP group is reflected in the AP system profile too.

Navigate to Configuration > AP Groups > Profiles > AP Group > AP > AP system > LMS Settings

 

 

 

Version history
Revision #:
4 of 4
Last update:
‎03-31-2017 11:19 AM
Updated by:
 
Labels (1)
Contributors
Comments

dear @esupport,

 

i'm already set LMS IP between 2 cluster

 

but after controller with primary lms ip up, access point wont change switch ip to primary lms ip, just stay in back up lms ip,

 

can you please advice me how to do it ? even i'm already check the pre emption configScreenshot (776).png

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: