Migration to ArubaOS 8

Anonymous
Not applicable

 

Migration of Aruba deployments from ArubaOS 6 to ArubaOS 8 involves a few more steps and precautions than performing a simple controller image upgrade. This chapter covers topics including migration methods, best practice recommendations on when to choose a particular method over another, and outlines how typical ArubaOS 6 network topologies can be migrated to ArubaOS 8. Depending on the ArubaOS 6 topology, migration can either be performed manually or by using the Migration Tool.

 

 

Version history
Revision #:
1 of 1
Last update:
‎05-09-2018 07:51 PM
Updated by:
Anonymous
 
Contributors
Comments

Where are the initial setup-dialog parameters saved?  Can the values displayed by the "show configuration setup-dialog" command be written to a file and downloaded to a 6.x controller, then just download the 8.x image to the inactive partition and reboot?  I have > 200 local controllers to get from 6.x to 8.x.  My life would be so much easier if there was just a way to preload the 8.x setup-dialog answers onto a 6.x controller.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: