Requirement:
- Console Access
- Flash Backup
Unlock bricked controller
- Backup flash (best practice is to transfer offline but this step is not necessary to recover) Upgrade the controller to the desired FIPS OS version & reload the controller
- After upgrade, reboot the controller
- Interrupt boot sequence when directed
Hit any key to stop autoboot: 0
cpxload#
cpxload# cpboot
Hit Ctrl + X key to stop autoboot: 0
Enter the following script:
cpboot>
cpboot>setenv cfgfile tmp
cpboot>saveenv
cpboot>bootf
- Respond to initial setup dialog: you can accept all defaults except country-code, admin password, & enable secret password.
- You will be prompted to save & reboot
cpboot>setenv cfgfile
Tested in lab and resolved issue in multiple cases
© Copyright 2024 Hewlett Packard Enterprise Development LPAll Rights Reserved.