What do I do when the Aruba Wireless LAN Controller PoE stops working when it is connected to a PoE LAN switch? Printable View | Help for this Page Show FeedShow Feed Follow this how to to receive updates in your feed.Follow Rate This Article

Aruba Employee
Aruba Employee

Product and Software: This article applies to all Aruba Mobility Controllers.


If a Power over Ethernet (PoE) LAN switch is connected to an Aruba Wireless LAN Controller and PoE is enabled on the Wireless LAN Controller and also on the PoE switch; then the PoE on the Aruba Wireless LAN Controller stop working.


Note: PoE might work on one or two Aruba controller ports, but it does not work on the rest of the ports.

Fix: Currently this issue does not have a fix.


Workaround: Disable PoE on the ports that connect the Aruba controller and the PoE switch. This should be followed as the Aruba best practice.

Version history
Revision #:
1 of 1
Last update:
‎07-01-2014 01:56 PM
Updated by:
Labels (1)
Search Airheads
Showing results for 
Search instead for 
Did you mean: