What is the command to verify and understand the load balancing of clients across AP's?

MVP Expert
MVP Expert
Q:
What is the command to verify and understand the load balancing of clients across AP's?


A:
In a very dense deployment where we have huge number of clients had to associate to Access Points, the clients has to be load balanced across the Access Points for better performance. We can verify how the load balancing has been done using below command which will give us the stats of both the bands and load balancing history as well.
(Aruba7210) #
(Aruba7210) #show ap load-balancing

AP:18:64:72:cd:c8:ba MAC:18:64:72:5c:8b:a0 Channel:6 EIRP:21.5 Max EIRP:21.5 Edge:enable
Client Density:0 Valid neighbors: 0 Relevant neighbors: 0 Rx Probe Reports: 2467
Moves(T/S):2/1 Sticky(T/S):0/0 Bandsteer(T/S):2/1 Loadbal(T/S):0/0
Neighbor Data
-------------
Name  IP Address  SNR (dB)  Path Loss (dB)  Channel/Pwr  Neighbor Density  Neighbors (R/T)  Relevant
----  ----------  --------  --------------  -----------  ----------------  ---------------  --------
Legend: R = Relevant, T = Total,  Neighbor Density = (Overlap/Neighbor's Density/ Overlap to local density ratio/ Overlap to neighbor's density ratio)

AP:18:64:72:cd:c8:ba MAC:18:64:72:5c:8b:b0 Channel:40 EIRP:21 Max EIRP:21 Edge:enable
Client Density:0 Valid neighbors: 0 Relevant neighbors: 0 Rx Probe Reports: 2467
Moves(T/S):0/0 Sticky(T/S):0/0 Bandsteer(T/S):0/0 Loadbal(T/S):0/0
Neighbor Data
-------------
Name  IP Address  SNR (dB)  Path Loss (dB)  Channel/Pwr  Neighbor Density  Neighbors (R/T)  Relevant
----  ----------  --------  --------------  -----------  ----------------  ---------------  --------
Legend: R = Relevant, T = Total,  Neighbor Density = (Overlap/Neighbor's Density/ Overlap to local density ratio/ Overlap to neighbor's density ratio)

(Aruba7210) #

Version history
Revision #:
2 of 2
Last update:
‎03-07-2016 02:49 PM
Updated by:
 
Labels (1)
Contributors
Comments

And I found few more CLI to observe the cluster verification.

•show lc-cluster group-membership

•show lc-cluster vlan-probe status

•show lc-cluster heartbeat counters

•show ap standby

•show user-table standby

•show datapath user standby

•show aaa cluster essid <essid name> mac <client mac address>

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: