Q:
Question : How to bypass Controller discovery in UAP?
Solution:
In apboot type the below command to bypass controller discovery:
setenv uap_controller_less 1
you can confirm the same in bootup process also,
10.17.168.27 255.255.255.224 10.17.168.1 2001::f8/64 Scope:Global ADP is disabled by uap_controller_less
At any point to confirm you have set up bypass controller discovery, when the UAP in IAP mode you can execute the below command:
70:3a:0e:c1:2e:72# show ap-env
Antenna Type:Internal Need USB field:Yes standalone_mode:1 iap_zone:test,test1 uap_controller_less:1 70:3a:0e:c1:2e:72#
To reset the master disocvery execute the below command:
setenv uap_controller_less 0
© Copyright 2024 Hewlett Packard Enterprise Development LPAll Rights Reserved.