How to configure a static channel & power for an IAP?
We can configure static channel & power for an IAP using WebUI and CLI
Using WebUI =========== 1. Click on the respective AP 2. Click on Edit 3. Click on Radio 4. Change the Channel and Power for the a-band and g-band respectively
Using CLI ========= Syntax ====== IAP# a-channel <channel> <power> IAP# g-channel <channel< <power> IAP# commit apply IAP# write memory Example ======= 6c:f3:7f:c4:0b:68# a-channel 161 23 6c:f3:7f:c4:0b:68# g-channel 11 23 6c:f3:7f:c4:0b:68# commit apply 6c:f3:7f:c4:0b:68# write memory
6c:f3:7f:c4:0b:68# show ap-env Antenna Type:Internal wifi0_arm_channel:161 wifi0_arm_power:23 wifi1_arm_channel:11 wifi1_arm_power:23 disable_prov_ssid:1 mesh-ldart-disable:1 6c:f3:7f:c4:0b:68# 6c:f3:7f:c4:0b:68# show aps 2 Access Points --------------- Name IP Address Mode Spectrum Clients Type Mesh Role Zone Serial # 2.4 Channel 2.4 Power (dB) 2.4 Utilization (%) 2.4 Noise Floor (dBm) 5.0 Channel 5.0 Power (dB) 5.0 Utilization (%) 5.0 Noise Floor (dBm) Need Antenna Config From Port Config Id Config Csum Ext SSID Active Age ---- ---------- ---- -------- ------- ---- --------- ---- -------- ----------- -------------- ------------------- --------------------- ----------- -------------- ------------------- --------------------- ------------------- --------- --------- ----------- --------------- --- 6c:f3:7f:c4:0b:68 10.17.170.247* access disable 0 135(indoor) Portal - AX0162837 11 21 66(ok) -87(ok) 161 22 17(good) -96(good) No none 1 11838 disable 3d:2h:41m:10s d8:c7:c8:cc:90:6e 10.17.170.246 access disable 0 134(indoor) Portal - AX0084024 11 24 36(good) -96(good) 161 22 8(good) -96(good) Yes none 1 11838 disable 3d:2h:41m:4s
© Copyright 2024 Hewlett Packard Enterprise Development LPAll Rights Reserved.