Article Options
- Article History
- Subscribe to RSS Feed
- Mark as New
- Mark as Read
- Bookmark
- Subscribe
- Email to a Friend
- Printer Friendly Page
- Alert a Moderator
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Alert a Moderator
Is it possible to identify Master IAP using Slave IAP serial number in activate?
Q:
A:
Is it possible to identify Master IAP using Slave IAP serial number in activate?
A:
In the below example, Slave IAP serial number is used to identify Master IAP.
Master IAP will be highlighed as controller as shown below.
Serial: |
CM0321454 |
MAC: |
04:BD:88:C1:E4:9E |
Part Number: |
IAP-205-RW |
Mode: |
IAP-SUB |
Platform: |
Taurus |
Current FW: |
6.4.3.1-4.2.0.1_51844 |
Boot Version: |
1.5.3.14 |
Controller: |
04:BD:88:C1:E4:94 |
Devices Associated: |
16 |
Once we get the MAC address we can identify the Master IAP serial number in activate.
We can see the mode as IAP-VC which is a Master IAP.
Serial: |
CM0321449 |
MAC: |
04:BD:88:C1:E4:94 |
Part Number: |
IAP-205-RW |
Mode: |
IAP-VC |
Platform: |
Taurus |
Current FW: |
6.4.3.1-4.2.0.1_51844 |
Boot Version: |
1.5.3.14 |
Controller: |
04:BD:88:C1:E4:94 |
Devices Associated: |
16 |
Version history