Controllerless Networks

Hi,

I am a new user for AK3200 aruba controller current in used. The controller was setup by earlier adminstrator, now i faced problem with remote AP configs, kindly show me how to view userid and pwd in my controller. thanks.

If you need to recover the admin username and password, you will need a console cable and follow instructions here:  https://arubanetworkskb.secure.force.com/pkb/articles/FAQ/How-do-I-reset-the-enable-password-on-controller-and-set-a-new-password

Hi,

not admin pwd, to reset the remote AP ! thanks

Which model of Remote AP is it?

AP 125 AND 105

You would do a purge, like this knowledgebase article describes here:  https://arubanetworkskb.secure.force.com/pkb/articles/HowTo/R-160

thanks i will try that later, as the AP is remote site. BTW, do you have manual or guides on how to use or configure controller? thanks.

http://support.arubanetworks.com/DOCUMENTATION/tabid/77/DMXModule/512/Default.aspx?EntryId=218

To reset the password, you will need to console into the controller and enter the following:

User: password

Password: forgetme!

Then go in and reset the password:

(controller)# config t
(controller)(config)# mgmt-user admin root
Password: <new password>
Re-Type Password: <new password>
(controller)# write mem