Controllerless Networks

last person joined: yesterday 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

AP register fail because of image mismatch

This thread has been viewed 57 times

  • 1.  AP register fail because of image mismatch

    Posted Nov 14, 2019 10:02 PM

    Hi,

     

    I was after some assitance with joing an AP to a virtual controller. 

     

    Im currently trying to add a AP305 running  6.5.4.3_61959. to a virtual controller.

     

    The VC is a mesh of AP205's running  6.5.4.14_72510

     

    I am currently getting an AP alert - AP register fail because of image mismatch.

     

    Can someone please tell me what version of the firmware I need to put on the 305 to get it to join the VC?

     

    Thanks in Advance.

     



  • 2.  RE: AP register fail because of image mismatch

    Posted Nov 15, 2019 12:38 AM

    Upgrade your VC greater than New APs Firmware. else you can downgrade new AP lesser than Aruba VC.



  • 3.  RE: AP register fail because of image mismatch

    EMPLOYEE
    Posted Nov 15, 2019 07:28 AM

    When you want to join a new AP type to an existing cluster, make sure the firmwares match exactly up to the build number. Upgrading the 305 to 6.5.4.14_72510 sounds most logical. Please make sure you have the AP up on a separate network in order to access the WebUI to do the upgrade.