Controllerless Networks

New Contributor

APIN0225 turn off mobility


I have received as gift an APIN0225, after a factory reset I have an access to the WebUI, I can easily configure the access point. 

The AP is powered by POE on eth0 


But after a reboot the AP stick on 'turn off mobility'

Another strange thing, the firmware updates failed every time. 

Here are the logs of the boot sequence.


Thanks for your help.



Guru Elite

Re: APIN0225 turn off mobility

Unfortunately, it looks like someone uploaded the instant code to a Campus AP.  Since Campus APs do not have a country code set, the Instant throws that error.  Others can chime in whether or not there is a fix for this.

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Video Knowledge Base
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide

Re: APIN0225 turn off mobility

Lets confirm if you have an IAP or CAP. Can you read off the exact model number from the back of the device?


Does it say: IAP-225-US or AP-225?


If possible, factory reset the device using the reset button or console and then login to device using admin admin and fetch a show tech.

Search Airheads
Showing results for 
Search instead for 
Did you mean: