Controllerless Networks

Reply
Occasional Contributor II

Air monitoring AP207- Get Inactive "I" Flag

we Try to depoly AP as a AM mode but every time get I flag we make a basic trubleshooting "change static ip , factory reset , change switch port and change "but didn't help.

 

note that ap is 207

cntr is 7030 on 6.5.4.6.

MVP Guru

Re: Air monitoring AP207- Get Inactive "I" Flag

Are your Radio Profiles set to am-mode?

 

rf dot11a-radio-profile "dot11a-AM"
    mode am-mode
!

ACMP, ACSA, ACDX #985
If my post addresses your query, give kudos:)
Occasional Contributor II

Re: Air monitoring AP207- Get Inactive "I" Flag

yes.profile set as am-mode not ap-mode

MVP Guru

Re: Air monitoring AP207- Get Inactive "I" Flag

Do you want to share your configuration as its difficult to troubleshoot with minimal information. What is the regulatory domain of the APs? Have you check the logs for any warnings or errors regarding to the AM's?


ACMP, ACSA, ACDX #985
If my post addresses your query, give kudos:)
New Contributor

Re: Air monitoring AP207- Get Inactive "I" Flag

i have bacup configuration but before create ids/ips . will it help ?

 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: