Airgroup basic question?

Hi All,

Does airgroup only work on the IAP-105's when the VC/IAP is handling the VLANS itself?

If a VLAN is set as static and network assigned, then will Airgroup not work?

Thanks,

Rob.

OK so I have Arigroup enabled and also guest bonjour multicast.

I can see apple TV's and epson printer and Denon amplifier on the Airgroup servers, but on iphone/ipad I only see the Denon Amplifier visable on Airplay devices!

Any ideas?

Now I can see some Apple TV's. But not all, the Cache looks OK on AirGroup servers page?!

Are the clients in the same subnet as the airgroup devices or a different subnet?

Are the subnets separated by a NAT boundary?

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars

Clients were a mix, one SSID is on the same VLAN as the Apple TV's the other 3 on seperate VLANs, but they are not NAT as there is a L2 switch handling the routing and VLANS.

In the end with the help of Aruba I managed to get all the 8 apple TV's showing on the airplay of the device, this was achiveved with a firmware downgrade. I am still yet to test the airplay fully and see if its usable and quick.

Controllerless Networks