Controllerless Networks

Reply
Highlighted
PVS
Occasional Contributor II

Airwave + controller

Hi,

 

Can someone let me know the commands to configure Airwave on the aruba controller which is running on 6.5.

 

Thanks in advance.

MVP Guru

Re: Airwave + controller

You can use the built in Wizard on a physical controller to do this:

 

Configuration > Wizards > AirWave

 

https://www.arubanetworks.com/techdocs/ArubaOS_651x_Web_Help/Content/ArubaFrameStyles/Management_Utilities/AW_Wizard.htm

 

Or CLI commands :

 

(Controller-Name) (config) # mgmt-server type amp primary-server <AMP IP>(Controller-Name) (config) # write mem

If you are using an IAP, then the below will also guide you through.

 

https://community.arubanetworks.com/aruba/attachments/aruba/Controller-lessWLANs/29/1/00003516-1.pdf


ACMP, ACSA, ACDX #985
If my post addresses your query, give kudos:)
Guru Elite

Re: Airwave + controller

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: