Controllerless Networks

Reply
Highlighted
New Contributor

Airwave doesn't know iap325

Hello,

 

Airwave doesn't know our iap325's

Everytime i poll or try to discover our iap:

Unknown SysObjectID ".1.3.6.1.4.1.14823.1.2.78", remaining as generic device type.

 

but : 

in mibs:

IAP-3251.3.6.1.4.1.14823.1.2.78

 

Highlighted
MVP Expert

Re: Airwave doesn't know iap325

What version are you running at Airwave and the IAP's?

Willem Bargeman ACMX#935 | ACCX #822

Please give me kudos if my post was useful!
If your issue is solved mark the post as solution!
Highlighted
MVP Expert

Re: Airwave doesn't know iap325

How you are adding IAP device to Airwave? We have to proivde airwave IP details in IP under system sectoion.

 

We can not add IAP as SNMP devices in Airwave


Pavan Arshewar | ACCP

If my post address your queries, give kudos and accept as solution!
NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Highlighted
New Contributor

Re: Airwave doesn't know iap325

 

airwave 8.2.8.2 (the last but i've tried with version 8.2.6.1 and 8.2.8.1

 

AIP325 8.3.0.6_69128 but i've tried with 6.5.4.11 and 6.5.4.3

 

 

Highlighted
New Contributor

Re: Airwave doesn't know iap325

i've tried with discover mode but failure ... 

 

i've tried with add device mode but the configuration of the aip is wrong cause the message  Unknown SysObjectID ".1.3.6.1.4.1.14823.1.2.78"

 

Other pb, there is no template for this equipment (cause airwave think it's and generic equipement

Airwave communicates with the iap, he has found the firmaware version but cannot understand the answer for the model

{ GetResponse(38) R=26854121 system.sysObjectID.0=E:14823.1.2.7}

{ GetResponse(73) R=940935988 system.sysDescr.0="ArubaOS (MODEL: 325), Version 8.3.0.6-8.3

Highlighted
MVP Guru

Re: Airwave doesn't know iap325

Have you added the AirWave IP under the VC as opposed as a generic device? This will integrate the VC and IAPs into AirWave correctly. If you check the AirWave 8.2.8.2 supported devices documentation, it only lists ArubaOS 8.3.0.0, 8.3.0.1, 8.3.0.2, and 8.3.0.3 as supported. So I suspect you will need to wait for a later release of AirWave to support 8.3.0.6.


ACMP, ACSA, ACDX #985
If my post addresses your query, give kudos:)
Highlighted
Aruba Employee

Re: Airwave doesn't know iap325

Did this get resolved as i see similar with a 325 as well.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: