Controllerless Networks

Reply
Moderator

Re: AppRF with Instant

Click on an AP, then you should see it on the right next to Monitoring and Client Match.

 

apprf-instant-location.png


| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Highlighted
Occasional Contributor I

Re: AppRF with Instant

Hi Guy's and Gal's,,

 

  • Aruba Instant 6.3.1.4-4.0.0.5 running on IAP 225's.
  • Managed in a Group within AirWave 8.0.6.1

Issue:

Cannot get AppRF info within AirWave on this IAP Cluster of 225's.

(as a side note: I have another Group of AP's registered to a controller managed by this same AirWave and AppRF is working. I see AppRF under the Home Page.)

 

I read this post and it looks like I don't have it enabled under - Group - Instant Config, but Its not available. If I go to the Instant GUI of the Controller, AppRF is not listed as an option. Plus, I cannot change anything due to AirWave Management. 

 

I've read that this should be supported in this AP Model but missing something.

Any clues would be most helpful..

 

Thanks

 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: