Controllerless Networks

Hi Team,

 

Need urgent help !

 

We have IAP 93 on two of our office floors and recently we aquired a new floor where we deployed AP 115 which for some reason is not getting detected by the controller in IAP 93. Any assistance here would really help.

 

Also could someone tell me the default username and password for logging to AP 115 via console ?

Are all of the APs running the same code?

Is the 115 running the same OS ?
If is not using the same OS then bring the 115 on separate VLAN and update it with the same code you have on your IAPs
The default username/ password is admin/admin

Hi,

 

The issue is very simple,

 

IAP 93 is Orion and IAP 115 is Pegasus, both are different hardware therefore they are not able to sync.

 

you have to upgrade the code either mannually or through Airwave.

 

while updating the code, ensure that you are choosing the right code, i.e for IAP 93 choose Orion (ArubaInstant_Orion_6.3.1.8-4.0.0.7_44641) and for IAP 115 choose Pegasus ( ArubaInstant_Pegasus_6.3.1.8-4.0.0.7_44641) .

 

to console any IAP default admin password is admin.

 

hope got some clarity, please feel free to comeback for any further help on this.

 

Cheers,

Venu Puduchery

My other 10 IAP 93 are running on 6.2.0.0-3.2.0.4_38110

While the new 115 is running on 6.3.1.4-4.0.0.5

 

Should i downgrade the new 115 ?

I would upgrade the 93s

You mean to upgrade the 93s to 6.3.1.4-4.0.0.5 ?

 

If so , could you provide me any reference docs which can help me to do so, as when I try to check for new updates on the IAP via web, it says no updates found.

If you have a support contract you can download the applicable instant os at support.arubanetworks.com and upload it in the same place on the VC.

Could you check if 92/93 is running at least version 4.0.0.7?