Controllerless Networks

last person joined: 2 days ago 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

Aruba 515s not showing up in Virtual Controller

This thread has been viewed 4 times

  • 1.  Aruba 515s not showing up in Virtual Controller

    Posted Sep 24, 2019 08:10 PM

    I have a Virtual Controller with 8.4.0.4. And the two 515 access points I have will not show up as active access points. They do show up as allowed-ap under configuration.

     

    The rest of the access points in the VC are 325s (20 Total).

     

    Any suggestions on how I can get them to show up as active access points? And bring the total up to 22?

     

    Thank you,



  • 2.  RE: Aruba 515s not showing up in Virtual Controller
    Best Answer

    EMPLOYEE
    Posted Sep 24, 2019 09:34 PM

    Are the 515s running 8.4.0.4 code?



  • 3.  RE: Aruba 515s not showing up in Virtual Controller

    Posted Sep 25, 2019 01:55 PM

    Updated them to the same code and they are now showing up.

     

    Thank you,



  • 4.  RE: Aruba 515s not showing up in Virtual Controller

    Posted Sep 25, 2019 01:59 AM
    What is the output of "show ap database | include <ip of ap>".

    Do you have sufficient licenses ?

    An MM license along with an AP license is consumed.

    What is seen in " show license-usage ap ".

    What do the console output indicate? Is this AP abke to discover the master and receive an IP.?



  • 5.  RE: Aruba 515s not showing up in Virtual Controller

    EMPLOYEE
    Posted Sep 26, 2019 06:13 AM

    Hi Ajay,

     

    It is an instant installation, so no licences needed.

     

     



  • 6.  RE: Aruba 515s not showing up in Virtual Controller

    Posted Oct 02, 2019 07:41 AM

    Need Firmware 8.5 to support the 500 series access points.