Controllerless Networks

last person joined: 16 hours ago 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

Aruba Central reports firmware failure after an upgrade

This thread has been viewed 2 times

  • 1.  Aruba Central reports firmware failure after an upgrade

    Posted Jan 31, 2020 04:24 AM
      |   view attached

    Hi friends,

     

    I've updated IAP to version (8.5.0.5_73491) following your recommendation about 

    Aruba Support Advisory ARUBA-SA-20191219-PLVL08 :: Aruba Instant Certificate Expiry (Rev-2) [January 2020] from CLI using "upgrade-image tftp://..." command. The upgrade is ok, as it's seen at IAP console, but Aruba Central says there is a firmware upgrade failure and a new try is recommended.

     

    ALDAC002# sh image version

    Primary Partition :0
    Primary Partition Build Time :2019-12-7 03:00:12 UTC
    Primary Partition Build Version :8.5.0.5_73491 (Digitally Signed - Production Build)
    Backup Partition :1
    Backup Partition Build Time :2019-10-26 07:09:32 UTC
    Backup Partition Build Version :8.5.0.4_72900 (Digitally Signed - Production Build)
    AP Images Classes
    -----------------
    Class
    -----
    Ursa
    ALDAC002#

     

    Why does Aruba Central say that?

     

    Thanks in advance.

     

    Regards.



  • 2.  RE: Aruba Central reports firmware failure after an upgrade

    EMPLOYEE
    Posted Feb 07, 2020 07:24 PM

    see if clearing your browser cache helps.



  • 3.  RE: Aruba Central reports firmware failure after an upgrade

    Posted Feb 10, 2020 02:36 AM

    Hi,

     

    I did it, but it didn't work. I think the reason is in another place, not in the browser.

     

    Regards.

     

    Bye.