Controllerless Networks

Contributor I

Aruba IAP clients getting disconnected

Hi Gurus , 


We have deployed 7 IAP,s in one of our new branch , We have connected a POE switch for the connectvity and have terminated the ADSL line in that switch . Only 1 vlan have been created which is been used for this task only , and DHCP is configured . Now we are facing an issue ,  whenever the connected user,s number is increasing ( suppose more than 30 ) the next users are not able to connect to the WIFI . I assume it could be a dhcp pool issue ,Could you please suggest what could be  the problem and appreciate if you could share some suggestions as per your vast experience and knowledge .


Thanks and Regards ,


Guru Elite

Re: Aruba IAP clients getting disconnected

SSH into the Virtual Controller and execute "show aps".  That is a good starting point.

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
ArubaOS Consolidated Release Notes
Aruba Technical Webinars
Contributor I

Re: Aruba IAP clients getting disconnected

Hi Cjoesph , 


Thanks a lot for your guide line , you are always there to help and i really appreciate that . I have found the sloution and RCA for this issue . Actually the ISP router was having DHCP limitation. On Linksys router the max DHCP users limit was set to 50 , i have changed it to 200 and things have started working fine . 


Regards ,


Search Airheads
Showing results for 
Search instead for 
Did you mean: