Controllerless Networks

last person joined: yesterday 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Expand all | Collapse all

Aruba IAP315 not joining cluster/fully booting

This thread has been viewed 4 times
  • 1.  Aruba IAP315 not joining cluster/fully booting

    Posted Mar 18, 2019 03:09 PM

    Hello all,

     

    We are in the process of changing all of our access points to IAPs and have been configuring them. We had successfully confgured multiple IAP 305s and a 304 by having them boot with DHCP and then assigning a static address later one, they were all in the same vlan and broadcasting the same SSIDs.

     

    On the 315, I changed the address and followed the same steps as with the other ones but the IAP will not show up inside the virtual controller. I can type in the address of the 315 into a browser and it will route me to the GUI of the virtual controller but the AP will not be listed with the cluster. The system status light is green/flashing so I think the boot is finished.

     

    I tried to upgrade the firmware on all the IAPs and the result is the same.

     

    Does anyone know what might be causing this?



  • 2.  RE: Aruba IAP315 not joining cluster/fully booting

    EMPLOYEE
    Posted Mar 18, 2019 03:11 PM

    What version of Instant is your existing cluster?



  • 3.  RE: Aruba IAP315 not joining cluster/fully booting

    Posted Mar 18, 2019 03:17 PM

    6.5.4.8_65873 Ursa

     

    One of the 315s was on 6.5.4.3 Hercules and the other 8.3.0.6 Hercules.

     

    Thanks for the quick reply. 



  • 4.  RE: Aruba IAP315 not joining cluster/fully booting

    EMPLOYEE
    Posted Mar 18, 2019 04:05 PM

    Did you try to downgrade them both to 6.5.4.8?



  • 5.  RE: Aruba IAP315 not joining cluster/fully booting
    Best Answer

    Posted Mar 18, 2019 04:21 PM

    I upgraded to master IAP305 to 8.3.0.6 and now they are working and seeing eachother.

     

    Thank you