Controllerless Networks

last person joined: yesterday 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

Aruba Instant 802.1x with HP IMC UAM

This thread has been viewed 2 times

  • 1.  Aruba Instant 802.1x with HP IMC UAM

    Posted Jun 16, 2017 07:43 AM

    Hello,

    Is there are possibility to change Acceess-Request attribute in Aruba Instant OS?

    Problem is that I'm trying to implement RADIUS 802.1x authentication (WPA2-Enterprice) with HP IMC UAM server. But virtual controller sends wrong Access-Request with attribute Service-Type Login but not Framed as it should  be.. So  IMC interprets that as Device Management Service but not LAN Access Service and rejects Access-Request.

    Any ideas?

    iMC UAM version 5.2

    Aruba IOS version 6.5.0.0-4.3.0.0_56428



  • 2.  RE: Aruba Instant 802.1x with HP IMC UAM

    EMPLOYEE
    Posted Nov 15, 2017 06:17 AM

    Hello,

     

    Did you find a work around ? I'm also facing this issue.

    So before spending time on this, I'd like to know if you have the solution :)

     

    Thanks,

    Fabien



  • 3.  RE: Aruba Instant 802.1x with HP IMC UAM

    Posted Nov 16, 2017 04:01 AM

    Hi Fabien,

    I had to upgrade APs because this feature was ony available since Instant OS 6.5.3 or a liitle bit earlier, now I am using 6.5.3. As I remembet problem was that Instant controller was not able to send Framed-User attribute.

    http://www.arubanetworks.com/techdocs/ArubaOS_65x_WebHelp/Content/ArubaFrameStyles/AAA_Servers/Configuring_Servers.htm 

     

    Config example for IMC  auth:

    wlan auth-server IMC
    ip xx.xx.xx.xx
    port 1812
    acctport 1813
    key 9766aa25ee6ce4bd2d5e70e20212308935def2bd009772f1
    nas-ip xx.xx.xx.xx
    service-type-framed-user 1x

     

    BR,

    Oleg