Hi All,
We have Aruba Instant APs with Central.
We would like to allocate bandwidth to the users based on the AD Accounts.
Is this something we could achieve?
Thanks.
What RADIUS server are you using?
I watched a video that it could be done with Aruba Clearpass.
https://www.youtube.com/watch?v=BXa7zdbPU9c
Could it be done with Microsoft NPS?
Yes you can. Please refer to the following thread:
https://community.arubanetworks.com/t5/Controllerless-Networks/IAP-single-SSID-different-roles-based-on-AD-OU-membership/td-p/303711
In your roles, you can assign different BW limits.
The link for VSA configuration:
https://community.arubanetworks.com/t5/Controller-Based-WLANs/How-do-i-go-about-in-doing-Vlan-derivation-against-Microsoft/ta-p/184848
You can use:
Aruba-User-Role 1 String Aruba 14823
If you have an option, go for ClearPass. A neat solution and day to day monitoring/troubleshooting will be a lot easier.
Could you please share a document on how to install/configure Aruba Clearpass from scratch? and then link it to IAP on Central?
Also, any configuration example for what we would like to achieve?
Assuming you are installing it on a vmware environment, you can refer to the following link:
https://www.arubanetworks.com/techdocs/ClearPass/6.6/InstallingOnVM_6.6_TechNote/Content/InstallOnVM_6.6/ESXinstallations.htm
Following links will be a good starting point for configuration:
https://www.youtube.com/watch?v=-SPiKgoBsmI
https://community.arubanetworks.com/t5/Security/How-to-map-access-to-a-specific-AD-Security-Group/td-p/309800
I would recommend contacting the local Aruba partner. They should be able to help you with the POC or any configuration help you may need. Depending on your requirements, they should be able to help you with the right HW scaling and licensing information.
© Copyright 2024 Hewlett Packard Enterprise Development LPAll Rights Reserved.