Can I cascade AP-205 From Second Port on AP-225 working in Instant Mode and what is the best configu
03-04-2015 05:38 AM
I have Location where is no network Cable
customer wanted to add Instant AP at this area connected to the exisitng Instant Cluster
Can i connect the new AP to nearest AP-225 from the second port
and what is the best configuration on the wired profile
Re: Can I cascade AP-205 From Second Port on AP-225 working in Instant Mode and what is the best con
03-09-2015 05:55 AM
It is possible to connect an AP to another AP over the wired port but , I would recommend you to bring up a mesh link in your scenario.
for your ref :
Step 1 : Disable extended SSID on the VC so that the Mesh functionality is enabled.
Step 2 : join the new AP (AP225) to the existing cluster
Step 3 : remove the AP-225 from the cluster and power up with external power supply, it will start acting as a Mesh point and it will form a Mesh link with the VC ( Mesh portal)
Hope this will help you.
Please feel free for any further help on this.
[Is my post helped you ? Give Kudos :) ]