Controllerless Networks

New Contributor

Changing Channel

I'm experiencing noisy channel, how can I change to another channel on 2.4 and 5 bands. I have IAP-225.

Contributor I

Re: Changing Channel

If you do not want to use ARM you can edit the Access Point.  Choose the "Radio" tab and select Administrator assigned.  From there you can choose which channel you wish to use.

Frequent Contributor II

Re: Changing Channel

There is another possibility, if you want to continue to use ARM for the auto-assignment of your channels, but if you want to change the available channels. In this case you have to go to "RF" link from the GUI interface and set the valid channels under the parameter "Customize Valid Channels": here you can remove the undesired channels and add new channels.



[If you found my post helpful, please give kudos]

Massimo Gallina
Telecommunications engineer - ACMP2013
Search Airheads
Showing results for 
Search instead for 
Did you mean: