Controllerless Networks

Occasional Contributor II

CoA issue with IAP 215 and CPPM

When we set CoA to use 3799 it says successful for Aruba Terminate Session, but doesnt actually bounce the client


When we set CoA to use 5999 then it says it cannot reach the network device.


Do we need to select the clearpass server under  services > Air Group?


Also, we noticed when we modified the port under Security, it changes but if we go in under the ssid, it still had the old settings.

Occasional Contributor II

Re: CoA issue with IAP 215 and CPPM

We had mistakently set Airgroup CoA and normal to the same.  CoA needs to be 3799 in Clearpass and AirGroup CoA needed to be 5999.  We also changed to source radius to be from the AP rather than from the VC.  All worked now.

Search Airheads
Showing results for 
Search instead for 
Did you mean: