Controllerless Networks

last person joined: 2 days ago 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

Configure Aruba Instant and Airwave

This thread has been viewed 1 times

  • 1.  Configure Aruba Instant and Airwave

    Posted May 15, 2012 08:37 AM

     

    I was wondering what ports do we need to allow the Aruba Instant and Airwave to communicate.

     

    And what are the steps to accomplish this.

     

    Thanks

     

     



  • 2.  RE: Configure Aruba Instant and Airwave
    Best Answer

    EMPLOYEE
    Posted May 15, 2012 08:58 AM

    Port tcp 443



  • 3.  RE: Configure Aruba Instant and Airwave
    Best Answer

    Posted May 15, 2012 09:02 AM

    The configuration steps are outlined in Chapter 21 of the IAP 3.0 users guide (available on the Aruba support site).



  • 4.  RE: Configure Aruba Instant and Airwave

    Posted May 16, 2012 09:07 AM

     

    Forgot to mention that i would like to connect e1 of the IAP 135 to e1 of a RAP and create a trunk connection between these two.

     

    Assigned an IP address to the virtual controller on the IAP of the trunk native VLAN(tunneling back through RAP) so we can reach it from our side.

     

    Can this be done ?

     

     

    Thanks

     

    Vic