Controllerless Networks

Reply
Highlighted
Contributor I

Configure LACP for the Wireless AP

Dear All

Can I configure the wireless AP port for the LACP to the PoE Switch. If Yes please guidance and I new in Aruba AP.

 

Controller Firmware: ArubaOS 8.3.0.6

AP Model: Aruba 345


Accepted Solutions
Highlighted
Frequent Contributor I

All Replies
Highlighted
Frequent Contributor I

Re: Configure LACP for the Wireless AP

Configure the switch ports to Lacp trunk and connect both cables to the ap. The AP knows when booting there is a lacp trunk. I think you can also config it manual but I think this is mutch easyer
Highlighted
Contributor I

Re: Configure LACP for the Wireless AP

Hi Expert

 

Thanks for the explanation and how should I verify the LACP Trunk on the AP side.

Highlighted
Frequent Contributor I
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: