Controllerless Networks

Regular Contributor II

Connect IAP 2015 against Radius

Hi all


I have two IAP 205 that I am using in a POC, for connect to the enterprise network.


Client says that has a Radius server for Vlan Control.


What is needed on the IAP for connect against the Radius server? Add the radius IP on the config?


I am not familiar with Radius, only know that they are like AAA servers .



Guru Elite

Re: Connect IAP 2015 against Radius

Who maintains the radius server?  It is very straightforward to connect an IAP to the radius server.  To make the user switch VLANs, the Radius server would have to send back the Aruba-Vlan-Attribute in the radius response to set the VLAN.  That VLAN would have to be trunked to the wired port of the IAP.

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Regular Contributor II

Re: Connect IAP 2015 against Radius



The radius is from the client.


But do I have to configure some parameters under the virtual controller?





Search Airheads
Showing results for 
Search instead for 
Did you mean: