I have a 650-US controller ArubaOS version 6.2.1.4 and 6 IAP-105s version 6.2.1.0-3.4.0.3_40346. I want to convert one of my APs to a CAP to make sure that my configuration on the 650 controller is setup properly, and then convert the rest of the IAPS. When I run "convert-aos-ap" in the command line (putty into IAP), the AP does not convert and I get the following system logs.
Nov 6 09:48:55 cli[1028]: <341098> <WARN> |AP d8:c7:c8:ca:f7:8b IAP04@10.10.10.50 cli| recv_convert_ap: Convert AP url-, mode-0, master-10.10.10.45.
Nov 6 09:48:55 cli[1028]: <341093> <ERRS> |AP d8:c7:c8:ca:f7:8b IAP04@10.10.10.50 cli| recv_image_upgrade_urls: 933: required class 10 not found in payload.
Nov 6 09:48:55 cli[1028]: <341093> <ERRS> |AP d8:c7:c8:ca:f7:8b IAP04@10.10.10.50 cli| recv_image_upgrade_urls: 933: required class 15 not found in payload.
Nov 6 09:48:55 cli[1028]: <341093> <ERRS> |AP d8:c7:c8:ca:f7:8b IAP04@10.10.10.50 cli| recv_image_upgrade_urls: 933: required class 26 not found in payload.
Nov 6 09:48:55 cli[1028]: <341093> <ERRS> |AP d8:c7:c8:ca:f7:8b IAP04@10.10.10.50 cli| recv_image_upgrade_urls: 933: required class 23 not found in payload.
Nov 6 09:48:55 cli[1028]: <341095> <ERRS> |AP d8:c7:c8:ca:f7:8b IAP04@10.10.10.50 cli| recv_image_upgrade_urls: url is NULL!.
I do not know why this is happening. I looked up the errors 341093 and 341095 and all they say is that the AP is upgrading. Does anyone have some insight on why this would not be working?