Controllerless Networks

last person joined: 2 days ago 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

Debug IAP-CAP conversion progess in AP side

This thread has been viewed 1 times

  • 1.  Debug IAP-CAP conversion progess in AP side

    Posted Mar 19, 2018 06:51 AM

    Hi!

     

    Is there any debug or show command on Aruba Instant OS to check how the conversion progess go, is it finished successfully or not?

     

    We find that sometimes you do it properly, but in many cases, nothing happens after the release of the convert-aos-ap command in the cluster, even if you type it several times with a few minutes difference.

     

    Sometimes it happens to start the reboot (one would think the conversion was done) but it will come back with Instant software as well.

     

    IAP cli shown this:

    xx:xx:xx:xx:xx:xx# convert-aos-ap cap x.x.x.x
    Converting to Controller based AP. Will automatically reboot when done.

     

    We access only the AP side, not the controller.

     

    Any advice for AP side debugging to see what happening?

     

    Thanks!



  • 2.  RE: Debug IAP-CAP conversion progess in AP side

    EMPLOYEE
    Posted Mar 19, 2018 07:16 AM

    show log upgrade

    show log system



  • 3.  RE: Debug IAP-CAP conversion progess in AP side

    Posted Mar 19, 2018 07:29 AM

    Thanks, I will try it and reply.



  • 4.  RE: Debug IAP-CAP conversion progess in AP side