Controllerless Networks

last person joined: yesterday 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

Disable Block Acknowledge

This thread has been viewed 1 times

  • 1.  Disable Block Acknowledge

    Posted May 25, 2018 08:01 AM

    Hi!

     

    We are troubleshooting what we precieve are client issues on a customer site and the devicevendor want to test to Disable Block Acknowledge.

     

    Can´t find this in the GUI anywhere , we are using ariwave instant config.

    I´ve read it´s posible to disable on controllerbased solutions. Is it possible to disable on instant based soultions ?



  • 2.  RE: Disable Block Acknowledge
    Best Answer

    Posted May 25, 2018 08:31 AM

    From the cli

    - configure

    - wlan ssid-profile "your-profile"

    - mpdu-agg-disable

     

    HTH

    Kevin



  • 3.  RE: Disable Block Acknowledge

    Posted May 25, 2018 08:34 AM

    Awesome thank you.

    Do you know if the cluster will accept cli commands when running instant config under airwave ?



  • 4.  RE: Disable Block Acknowledge

    Posted May 25, 2018 09:49 AM

    I am not completely sure, but I think that this should be done in AirWave if the VC is in "Manage Read/Write" mode

     

    HTH

    Kevin



  • 5.  RE: Disable Block Acknowledge

    Posted Jun 27, 2018 04:05 AM

    I took some help from TAC.

    Had to remove instant config GUI to apply cli commands. Then we ended up removing the commands since it didn't solve anything. And after that we re-enabled instant config gui.

    Thanks for the tip. Would be nice to be able to do cli / custom config even if we use instant config gui mode.