Controllerless Networks

last person joined: 2 days ago 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

How do I disable automatic image checks?

This thread has been viewed 3 times

  • 1.  How do I disable automatic image checks?

    Posted Jun 23, 2016 09:28 AM

    Hello!

     

    We have fairly strict software/firmware control on a product that integrates an IAP (6.4.4.4-4.2.3.0 FW version). We noticed that after a time our IAPs have different firmware on them than we expected.

     

    It looks like they are automatically searching for updates, I had thought that was only possible if the devices were connected to Airwave.

     

    After looking into the documentation, it looks like automatic checks (once after IAP boot and once a week afterward) is enabled.

     

    There is a command called "ignore-image-check" in the CLI Reference manual, however when I go to run the command, there is a parameter called  "val" that is expected with this command.  The document for the (6.4.4.4-4.2.3.0 CLI Reference Guide) doesn't show any parameters.

     

    What are the parameter do we need to enter to disable automatic image checks?

     

    Is there a way to do this from the Web UI as well?