Controllerless Networks

Reply
Guru Elite

Re: How to allow 40MHz width in ARUBA 135

Please PM me so I can send you a link to it.

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Occasional Contributor II

Re: How to allow 40MHz width in ARUBA 135

Hi,

 

 

We had pointed APs towrads down itself. The client match is disabled earlier itself. Which should I use for band steering? At present we are only having 2.4GHz clients.

Occasional Contributor II

Re: How to allow 40MHz width in ARUBA 135

Hi,

 

 

 We are not getting enough speed as we are receiving only 10MBPS at server. Yesterday we had received 310 GB data at server end from 6 APs but we should receive 700 GB atleast in 10 hours.

 

     Please suggest

Guru Elite

Re: How to allow 40MHz width in ARUBA 135

If you only have 2.4 GHz clients, the client match setting does not matter.

Did you try turning down the max power on the access points?

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Occasional Contributor II

Re: How to allow 40MHz width in ARUBA 135

Hi,

 

 Yes I had tried that also.

Guru Elite

Re: How to allow 40MHz width in ARUBA 135

Please open a TAC case so they can get the full picture and help you.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Guru Elite

Re: How to allow 40MHz width in ARUBA 135

Please open a TAC case so they can get the full picture and help you.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Occasional Contributor II

Re: How to allow 40MHz width in ARUBA 135

Hi,

 

 

 I am planning to take 5.8 GHz clients. Will IAP 135 support 5.8 GHz clients?

Occasional Contributor II

Re: How to allow 40MHz width in ARUBA 135

Hi,

 

 

   Please share me the latest firmware for ARUBA 135

Guru Elite

Re: How to allow 40MHz width in ARUBA 135


mail2mdileep@gmail.com wrote:

Hi,

 

 

 I am planning to take 5.8 GHz clients. Will IAP 135 support 5.8 GHz clients?


Yes.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: