Controllerless Networks

This community is currently in a read-only state due to a maintenance window. For more info click here
Reply
Highlighted
New Contributor

How to configurate lan interface for a single 303H with Instant (no controller)

Hi, I've about 80 mixed ap models 303 303H 304 and 505 managed with Istant VC

We need to configure only one of the AP 303H eth port passing some specific VLAN and the other 303H need to have a different configuration for eth ports.

I was not able to push configuration for only one ap as wired networks profiles applies to all AP.. I've searched for solution but only find a solution with configuration managed with a controller using the CLI. nothing for instant VC.

Thanks for your help

Regards

Highlighted
MVP

Re: How to configurate lan interface for a single 303H with Instant (no controller)

This is not currently supported. So you could put a specific AP in a standalone mode and configure the specific wired profile that way.


If a reply adequately addresses your issue, please click on the "Accept as Solution"
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: