Controllerless Networks

last person joined: 23 hours ago 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

How to configurate lan interface for a single 303H with Instant (no controller)

This thread has been viewed 1 times

  • 1.  How to configurate lan interface for a single 303H with Instant (no controller)

    Posted Aug 13, 2020 09:28 AM

    Hi, I've about 80 mixed ap models 303 303H 304 and 505 managed with Istant VC

    We need to configure only one of the AP 303H eth port passing some specific VLAN and the other 303H need to have a different configuration for eth ports.

    I was not able to push configuration for only one ap as wired networks profiles applies to all AP.. I've searched for solution but only find a solution with configuration managed with a controller using the CLI. nothing for instant VC.

    Thanks for your help

    Regards



  • 2.  RE: How to configurate lan interface for a single 303H with Instant (no controller)

    EMPLOYEE
    Posted Aug 24, 2020 08:56 PM

    This is not currently supported. So you could put a specific AP in a standalone mode and configure the specific wired profile that way.