So I've done a bunch of reading and looked at several posts. I cannot find an answer to my issue.
I have two IAP-105-JP. One has been set up with a main SSD and a guest SSD. It has a static IP, auto join is on, it is set to preferred master, plugged into the same switch which has only one VLAN. They have the same firmware.
The other one has a static IP, auto join is on, and it is plugged into the same switch. On the advanced system page, I did not put in the IP of the Virtual Controller.
I have looked at the logs and really do not see anything that jumps out at me.
So what do I need to do to the unconfigure IAP-105-JP to have it join with the configured one.
Thank you in advance