Controllerless Networks

Reply
Highlighted
New Contributor

IAP-205 Guest SSID not separated from private net.

I've setup a IAP-205 with a private/public SSID config. 

I've got a DHCP scope setup on the IAP with a captive portal. 

Trafic is working on both networks, a little too well on the public SSID. 

 

The puclic SSID is still able to access resources on the private network. I'm sure I'm overlooking something extremely simple, but since this is my first go at that IAP I need a bit of help.

 

Thanks.

 

 

Topology:

Internet Router -> ASUS RT-AC66U -> IAP-205 (6.4.2.0-4.1.1.0_46028)


Accepted Solutions
Highlighted
Moderator

Re: IAP-205 Guest SSID not separated from private net.

Did you create a network-based access rule to block your internal network?


If this response is more than 1 year old, it may no longer be accurate. Please consult official Aruba documentation, TAC or your Aruba SE.

| Aruba Alumni | @timcappalli | timcappalli.me |

View solution in original post


All Replies
Highlighted
Moderator

Re: IAP-205 Guest SSID not separated from private net.

Did you create a network-based access rule to block your internal network?


If this response is more than 1 year old, it may no longer be accurate. Please consult official Aruba documentation, TAC or your Aruba SE.

| Aruba Alumni | @timcappalli | timcappalli.me |

View solution in original post

Highlighted
New Contributor

Re: IAP-205 Guest SSID not separated from private net.

That was it. 

I knew it was something simple I was overlooking.

 

Thanks.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: