Controllerless Networks

Hello,

I have IAP 205s version 6.4.4.8-4.2.4.6_58505

I am trying to set up an SSID for use only on this Friday from 4p-11p.  I thought I set it up correctly, but when I test it and try to connect to it, it allows me to connect when it shouldn't.  I was hoping it would only let me connect during the time I specified?

In the UI I went to System>Advanced Options>Time Based Services.  I created an Absolute profile for 5/5/17 16:00 to 23:00.  I then went to edit the SSID>Show Advanced options>Edit Time Range Profiles> Enable the profile I created earlier.

Am I missing a step?

Have you seen the article here?  http://community.arubanetworks.com/t5/Controller-less-WLANs/Time-Range-Profile-on-IAP-from-4-2-1-firmware/ta-p/260889

Hi Colin,

Yes, I used that article to set up the time range.  when I do a show time range in the CLI I see this:

# show time-range

Current Time     :2017-05-03 07:25:33
Time Range Summary
------------------
Profile Name     Type      Start Day   Start Time  End Day     End Time  Valid
------------     ----      ---------   ----------  -------     --------  -----
Specific Friday  Absolute  05/05/2017  16:00       05/06/2017  23:59     No

Do you see something I am missing?

You need to disable the SSID.  The SSID then will only be enabled during the time range:

Ahhh...so in the edit SSID >Show Advanced Options check the SSID: disable box (next to the hide box)?

Then the time range setting will over-ride the disabled setting?

Yes.  Not very clear.

Thank you, Colin, once again you earned your Guru title!! :o)

Thank you!