Controllerless Networks

Reply
Occasional Contributor I

IAP 225 - Eth0 and Eth1 active two different Switches

Dear community,

 

during a PoC a critical requirement arose having both ports active where Guest Traffic is leaving on Eth1 to a local breakout an Corporate Traffic is leaving to Eth0.

Both Ports are connected to two different Switches which are not connected together.

I tried doing so by creating wired profiles pointing to each Eth Port without success.

The latest Instant Release 6.5.x.x 4.3.x.x has been installed.

 

Two different SSIDs will be applied at the end.

 

kind regards

Giancarlo Lume


LG
Don Django Caballero de Colorado

- Der Computer löst Probleme, die man ohne ihn nicht hätte -
Guru Elite

Re: IAP 225 - Eth0 and Eth1 active two different Switches

You are trying to have two different uplinks for user traffic?


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Occasional Contributor I

Re: IAP 225 - Eth0 and Eth1 active two different Switches

Yes exactly.

Viele Grüße
Giancarlo Lume

Bechtle GmbH & Co. KG, IT-Systemhaus Rottenburg, Phone: +49 7457 9387-770

Von meinem iPhone gesendet

LG
Don Django Caballero de Colorado

- Der Computer löst Probleme, die man ohne ihn nicht hätte -
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: