Controllerless Networks

Reply
Highlighted
Occasional Contributor II

Re: IAP 225 Mac iOS problems

Hi,

 

Transit power is set to Min: 9, Max: Max

Highlighted
Guru Elite

Re: IAP 225 Mac iOS problems

That range is too large.  The range should be no more than 6 between min and max.  You should make the max 15.  Too much power or asymetrical power can cause pauses and roaming issues like you have observed.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Video Knowledge Base
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Highlighted
Occasional Contributor II

Re: IAP 225 Mac iOS problems

Many thanks joseph and great response, we will follow your recomendation and try this settings!

Highlighted
Guru Elite

Re: IAP 225 Mac iOS problems

It may not help 100% but having the AP power at maximum causes sticky clients and disconnects.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Video Knowledge Base
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: