Controllerless Networks

Reply
Highlighted
Occasional Contributor II

IAP-315 Cluster Full power?

is there a way to make a clust give full pwer to the wifif at all times? A few of our site complain and i have seen it here that sometimes they have good signal and sometimes a week signal. 

 

im not sure why the power keep varing so much, it is set at "MAX" but still goes up and down, do i need to turn somthing else off? 

 

even sites that only have 1 AP do this I would just like the power to be steady 

 

 

Guru Elite

Re: IAP-315 Cluster Full power?

You need to set the min and max to be the same parameter.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Occasional Contributor II

Re: IAP-315 Cluster Full power?

I have done that already both are set for MAX

Guru Elite

Re: IAP-315 Cluster Full power?

What is the transmit power of the access point?


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Occasional Contributor II

Re: IAP-315 Cluster Full power?

where do i find this? 

Guru Elite

Re: IAP-315 Cluster Full power?

The AP list on the front page would say the transmit power.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Occasional Contributor II

Re: IAP-315 Cluster Full power?

screen shot? i clicked around everwhere in the cluster and i do not see anything reporting the tx power 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: