How to configure two uplink interfaces to use port1 for 5Ghz traffic port2 to be used for 2.4Ghz traffic?
On Aruba Instant you can use LACP to aggregate the traffic from the AP, but 2.4ghz and 5ghz will not be on separate interfaces: https://www.arubanetworks.com/techdocs/Instant_83_WebHelp/Web_Help_Index.htm#Instant_UG/Wired_port_profile/lacp_support.htm?Highlight=lacp
any idea how can we set different static ip address in eth1? (secondary eth uplink)
Pretty sure the IAP can only have one IP-address. Most common usecase for Eth1 would be either link-aggregation for link redundancy, bridge a vlan and/or daisy-chain another AP in lack of another network port.
© Copyright 2024 Hewlett Packard Enterprise Development LPAll Rights Reserved.