Controllerless Networks

Reply
Highlighted
Contributor I

IAP 370 - Not showing up in Airwave

We're trying to add an IAP 370/4 to our cluster but it's not appearing in Airwave - we're running Airwave 8.2.8.2, I notice the minimum software requirements for the IAP 370 mention ArubaOS & Aruba InstantOS 8.3.0.0. 

 

Does ArubaOS/InstantOS have any relationship to our Airwave version?

 

Anything else I'm missing here with adding a 374? We mostly have 270/5 units currently, but have never had this sort of issue.


Accepted Solutions
Highlighted

Re: IAP 370 - Not showing up in Airwave

In an IAP swarm, all AP's should be same version for the cluster to form.

View solution in original post


All Replies
Highlighted
MVP Expert

Re: IAP 370 - Not showing up in Airwave

IAP 370/374 have support in Airwave, if it still not discovering in Airwave after adding airwave ip details in IAP, need to check if any network issue or any service is down in system>status page which causing this issue.

 


Pavan Arshewar | ACCP

If my post address your queries, give kudos and accept as solution!
NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Highlighted
Contributor I

Re: IAP 370 - Not showing up in Airwave

It appears that this issue is related to firmware - we're running version 6.x on all of our other APs, this one came with v 8.3 out of the box.

 

I believe we'll need to update all the APs to 8.3 for the new AP to join the swarm, is that correct?

Highlighted

Re: IAP 370 - Not showing up in Airwave

In an IAP swarm, all AP's should be same version for the cluster to form.

View solution in original post

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: