Controllerless Networks

last person joined: 22 hours ago 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

IAP 510 goes unreachable when second IAP bootsup.

This thread has been viewed 0 times

  • 1.  IAP 510 goes unreachable when second IAP bootsup.

    Posted Aug 14, 2019 02:43 AM

    Hi All,

       I am New to HP Aruba. I am trying to setup IAP cluster from 2 IAP. IAP are connected to Hp Aruba aruba 2930m through Smart Rate module.  I have configure Smart rate moduel port as Trunk (tagged vlan 100 and 5 and untagged vlan 10). I booted up first IAP and configured SSID for vlan 100 and 5 and virtual controller ip . Next when I bootup second IAP I loose connection all IAP.  Please help.

     

    All brand new IAP 510 series with 8.4.x firmware.

     

    Thank you 

     



  • 2.  RE: IAP 510 goes unreachable when second IAP bootsup.

    MVP EXPERT
    Posted Aug 14, 2019 03:15 AM

    Could be a few reasons, firs that comes to mind is a duplicate IP address? Do you see anything in the IAP/switch logs? Do the ports stay up?



  • 3.  RE: IAP 510 goes unreachable when second IAP bootsup.

    Posted Aug 14, 2019 03:31 AM

    Thanks for quick reply. Port stays form Aruba 2930 point of view. No duplicate ip. 

     

    Update :

    I just did quick test by putting Aruba 2930 port to access mode(vlan 10 ) rather then trunk mode everyting works fine.

     

    Thank you