Controllerless Networks

Regular Contributor I

IAP 93 - Power Connector quite unstable / broken



anyone also having experienced that on IAP93 the power connectors for the 12V power supply are quite unstable regarding physical connection? Those little connector should be replaced so we can use RAP2 power supply's too on those IAP93 and dont have to buy all the time other power supplies for every AP ...


You remember 5V/4A on AP6x / AP12x series ,


AP105/IAP105  have this little power connector problem too...



New Contributor

Re: IAP 93 - Power Connector quite unstable / broken

This is very true. I have had to resort to hot glue to keep the plugs in. Thankfully practically all deployments are PoE.

Search Airheads
Showing results for 
Search instead for 
Did you mean: