08-26-2014 06:14 AM
My setup is :
Router -----> Switch ------> IAP -----> Client
My router give the IP to my IAP with a DHCP.
The client IP assignment is "Virtual Controller Assigned"
I have 50 clients with 10 IAP.
I receive a error when I new computer try to connect to the IAP. The IAP give my a alert "DHCP". Can I configure the DHCP on the IAP? What is the space for the DHCP?
Solved! Go to Solution.
08-26-2014 06:54 AM - edited 08-26-2014 06:55 AM
Are you allowing that VLAN on the IAP trunks ?
Can I configure the DHCP on the IAP?
What is the space for the DHCP?
The limitation is 512
Lead Mobility Architect @WEI
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Re: IAP DHCP
08-26-2014 07:02 AM - edited 08-26-2014 07:07 AM
The trunk is correct.
IAP 105, version:126.96.36.199-188.8.131.52_43022
I don't have any capture because I change my config. Now is the router give the DHCP to my IAP and my client. But I would like to know what is the problem.
I have a option to see what IP adress the IAP give to the client?